Dt Swiss 350 Carbon 29er Race Wheelset Sapim MTB 1450 Grams 10 x 135 15 x 100


Dt Swiss 350 Carbon 29er Race Wheelset Sapim MTB 1450 Grams 10 x 135 15 x 100


Here we have a custom built 29er ultra light wheelset.  This was a backup wheelset I had built 3 years ago with a pair of new takeoff DT Swiss 350 hubs.  Built by SpeedTuned here in California.  Speedtuned (StaTru Wheels) is a in the back of the scenes wheelbuilder for a large number of the factory wheels that come on higher end bikes.  This particular set uses the same carbon hoops with their in house label.  As a backup set these have slightly low mileage, circa 500 miles of mostly road and fire road.  Bearings are very nice, and spin smooth.  The rear hub has been recently cleaned and serviced with new synthetic grease.  Freehub bearings are nice, and the aluminum has very minor marks from an XT cassette.  Internal is 18T ratchet gears (they spin better than 36 or 54).  Carbon hoops are of the 3K Weave finish.  They have a dark grey fiber color vs a black look.  They are 21mm internal and 26mm external.  They are stan’s yellow taped, and have the valve stems installed.  I have only run these tubeless.  They are easier to install tires than the ramped Stan’s version hoops, though they may be able to be difficult to get some ultra thin lightweight tires to catch the first time.  Even so I used to be able to run Schwalbe Furious Fred’s without issue after sealing.  There are just a few minor scuffs on the carbon, and certainly no nicks, chips, or cracks anywhere, even around the critical edges.  Spokes are Sapim CX-Ray Black Bladed, Aluminum nipples are Sapim.  The 2 adjacent to the valve stem are anodized red.  There is some minor scratches to the rear cassette side inner spokes where I had a chain suck incident (see pictures).  Wheelset is straight, true, and without hops.  This can be a very light, very stiff, and very fast wheelset.  Actual weights as you see pictured are 660F, 790R, for a total of 1450 grams.  This is only 40 grams heavier than my exact same built wheelset with 240s 6 bolt hubs.  Includes a pair of DT Swiss Centerlock to 6 Bolt adapters for your rotors.
Front Hub – DT Swiss 350 15mm x 100mm CLDB – Convertible to QR with adapter
Rear Hub – DT Swiss 350 10mm x 135mm CLDB – Comvertible to 12 x 142 or QR
Rims – SpeedTuned Carbon 3K Weave – 21 / 26mm – 32 Hole
Spokes – Sapim CX-Ray Bladed
Nipples – Sapim Aluminum
Freehub – DT Swiss 18T Aluminum – Shimano 8,9,10s
These wheels are also advertised locally, and I reserve the right to end this auction early in the event they transform unavailable.
    I do not offer returns on USED items, though I do offer discounts for combined shipping.  Please check my seller feedback before you buy.

    No International Shipping
    Created with GarageSale

     _gsrx_vers_783 (GS 7.0.5 (783))


    There are no reviews yet.

    Be the first to review “Dt Swiss 350 Carbon 29er Race Wheelset Sapim MTB 1450 Grams 10 x 135 15 x 100”

    Your email address will not be published. Required fields are marked *