Tips for Cleaning and Maintaining Your Fixie Bike

It is very important to frequently clean and check for wear and tear on your fixie bike so it can keep running like new for many years to come. If you use your bike to get around town then it is even more it important to tune up your bike not less than once a year if not bi-annually. Here are some tricks to keep your bike street prepared at all times:

Require Tools:

You will need to have a few tools like a bike repair stand, lubrication, chain oil, wrenches, tire pressure gauge, water, a towel handy so that you can clean the bike quickly and easily and also make any maintenance easier to preform.

Cleaning Tips for the wheels:

To clean the bike,  you need to disconnect the brakes and remove the wheels. Now, with a rag soaked in soapy water wash between the cassette wheel sprockets or the freewheel. Next, use a dry towel to wipe out the hubs, rims and the spokes. Also make sure that the spoke tension of the tires and the alignment is adjusted. For cleaning the fixed gear bike frame you should use a rag soaked with a light cleaning soap  and then wipe the bike down. Make sure that you’ve taken care to wash all of the components correctly.

The first step to maintaining your fixie bike is to look out for any hairline cracks, shift cables or damaged brakes. If you discover that the damaged components are greater than you may deal with by yourself, take it to bike repair shop to ensure it gets it fixed immediately.

Lubrication can also be essential for the overall efficiency of your fixie bike. For lubricating use lubrication drops inside the shift parts, cable housing and the pivot points of the brakes. If there’s any oil on the brake pad, wipe it out as an excess oil could attract dust. So prevent that too by wiping out the excessive oil.

While you’re working on your fixie bike you must also tune the brakes so that they continue to perform correctly. For this it is advisable to examine the brake pad surface. If there are wear ridges, trim them off and use sandpaper resurface the brake pads. Also don’t forget to tighten the brake bolts correctly.

If you do these cleaning and maintenance steps frequently you will see that your fixie bike will remain in peak performance.

Leave a Comment

Your email address will not be published. Required fields are marked *